SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA with HART-interface; single action; polycarbonate enclosure with fixable slipping clutch without explosion protection Connection thread el.: M20x1.5 / pneu.: 1/4" NPT without limit monitor with installed position feedback module (4 ... 20 mA) . Brief instructions German / English / Chinese . without mounted pressure gauge block
Communications processor CP 343-1 Lean for connection of SIMATIC S7-300 to Industrial Ethernet via TCP/IP and UDP, Multicast, SEND/RECEIVE with and without RFC1006, Fetch/ Write, S7 communication (server), PROFINET IO device integrated 2-port switch ERTEC 200, Module replacement without PG, SNMP diagnostics, initialization via LAN, 2x RJ45 connection for LAN with 10/100 Mbit/s
Communications processor CP 343-1 Lean for connection of SIMATIC S7-300 to Industrial Ethernet via TCP/IP and UDP, Multicast, SEND/RECEIVE with and without RFC1006, Fetch/ Write, S7 communication (server), PROFINET IO device integrated 2-port switch ERTEC 200, Module replacement without PG, SNMP diagnostics, initialization via LAN, 2x RJ45 connection for LAN with 10/100 Mbit/s
Communications processor CP 443-1 for connection of SIMATIC S7-400 to industrial Ethernet over ISO, TCP/IP and UDP, S7 communication, fetch/write, SEND/RECEIVE with and without RFC1006 Multicast, PROFINET IO Controller, DHCP, SNMP V2, Web, diagnostics, initialization via LAN, access protection via IP access list integrated real-time switch ERTEC 400, 2xRJ45 Anschluss for LAN with 10/100 Mbit/s
COMMUNICATIONSPROCESSOR CP443-1 IT FOR CONNECTION OF SIMATIC S7-400 W. IND. ETHERN. ISO/TCP/IP,S7 COMM FETCH/WRITE, DIAG. EXPANSIONS SEND/RECEIVE, WITH AND W/O RFC, MULTICAST, NTP, INITIALIZING THROUGH LAN, FTP CLIENT, WWW, E-MAIL, 10/100 MBIT
Communications processor CP 5622 PCI Express X1 card for Connection of a PG or PC with PCI Express bus to PROFIBUS or MPI can be used under 32 bit and 64 bit For operating systems also refer to Entry ID 22611503
Communications processor CP 5611 A2 PCI card (32 bit; 3.3/5 V; 33/66MHz) to Connection of a PG or PC with PCI Bus to PROFIBUS or MPI (no Windows) 9x support!) currently Only 32-bit support with SIMATIC NET V8.2 Software! Only for old applications, Down Windows XP is 6GK1561-2AA00 recommended see http:/support. automation.siemens. com/WW/view/ DE/84138725 Notes
ControlLogix® DeviceNet Communication Module, Amperage Rating: Drawn: 400 MA At 5.1 V, Mounting: Chassis, Communication Protocol: DeviceNet, Enclosure: Open Type, Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2000 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 1890 MHZ,…
ControlLogix® DeviceNet Communication Module, Amperage Rating: Drawn: 400 MA At 5.1 V, Mounting: Chassis, Communication Protocol: DeviceNet, Enclosure: Open Type, Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2000 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 1890 MHZ,…
Synchronized Axes Module, Input: 4 Linear Displacement Transducers, Output: 4 Analog Outputs (Plus/Minus 10 VDC), Length: 5-1/8 IN, Width: 1-23/64 IN, Height: 5-11/16 IN, Module Update Time: 2 MS, Backplane Current: 1000 MA At 5 VDC, 200 MA At 24 VDC, Application: For use with programmable controllers
Sitrans Probe LU 2-wire,loop powered ultrasonic transmitter for level, volume and flow monitoring of liquids in open channels, storage vessels and simple process vessels. Enclosure/Cable Inlet: Plastic (PBT), 2 x 1/2" NPT (no cable glands supplied) Range / Transducer material: 6 meter (20 ft), PVDF Copolymer Process Connection: 2" NPT ((Taper), ANSI/ASME B1.20.1) Communication / Output: 4-20mA, HART Approval: General…
SIMATIC D7-FB Generator V2.1 incl. Service Pack 2; Single License for 1 install., E-SW, SW and documentation on CD, Class A, 2 languages (de, en), executable in Win95/98/ME/ Windows NT/2000/XP, Reference HW: SIMATIC FM458, T400, SIMATIC TDC, SIMADYN D
SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-,3-,4-wire; 4...20mA with HART-interface; double action; Enclosure Aluminium Ex d casing (flame-proof) with fixable slipping clutch with explosion protection (ATEX/IECEx/FM/CSA); Flameproof enclosure Connection thread el.: M20x1.5 / pneu.: 1/4" NPT without limit monitor without option module . Brief instructions German / English / Chinese . without mounted pressure gauge…
SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; single action; polycarbonate enclosure with fixable slipping clutch without explosion protection Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT without limit monitor without option module . Brief instructions German / English / Chinese . without mounted pressure gauge block
MOUNTING SET FOR SIPART PS2 ELECTROPNEUMATIC POSITIONER MOUNTING ON LINEAR ACTUATORS CONSISTING OF A LONG LEVER (COMPLETE MOUNTED) AND PICK- UP BRACKET, CLAMPING ASSEMBLY AND SCREWS. STRAKE RANGES: 30MM-130MM METAL PARTS VA-STEEL.
Communications processor CP 5622 PCI Express X1 card for Connection of a PG or PC with PCI Express bus to PROFIBUS or MPI can be used under 32 bit and 64 bit For operating systems also refer to Entry ID 22611503
SCALANCE X101-1, IE Media converter unmanaged 1x 10/100 Mbit/s RJ45 port, 1x 100 Mbit/s Multimode BFOC, LED diagnostics, error signaling Contact with Set pushbutton Redundant power supply, PROFINET-compliant securing collars, Manual available as a download available
***SPARE PART*** SIMOVERT MASTERDRIVES MOTION CONTROL - PERFORMANCE 2 CONVERTER CHASSIS UNIT, IP00 3AC 380-480V,50/60HZ,155A NOMINAL POWER RATING 75 KW DOCUMENTATION ON CD
The EJA310A is a Traditional-mount Absolute Pressure Transmitter in the series. EJA310A features include: 0.15% Accuracy (0.075% Option) 0.1% Stability External Zero Adjust
Triconex 3721 Analog Input Module, TMR Type, 0 to 5 or -5 to +5 VDC Differential, DC Coupled, 32-Point Triconex Systerm Features 0 to 5 or -5 to +5 VDC Differential 32-Point DC Coupled TMR Type
Dual Digital Output (DDO) modules receive output signals from the Main Processors along a single parallel or series path, and applies a 2-out-of-3 voting process individually to each switch. The switches produce one output signal which is then passed to the field termination. While the quadruplicated output circuitry on TMR modules provides multiple redundancy for all critical signal paths, dual…
The Model 3511 Pulse Input (PI) Module provides eight very sensitive, high-frequency inputs. It is optimized for use with non-amplified magnetic speed sensors common on rotating equipment such as turbines or compressors. The module senses voltage transitions from magnetic transducer input devices, accumulating them during a selected window of time (rate measurement). The resulting count is used to generate a…
TRICONEX Triple redundant fault-tolerant control system is introduced:Invensys TRICONEX system, completely follow IEC61508/61511 standard, adopt the most advanced TMR microprocessor hardware technology, mature and reliable TRISTATION 1131 triple redundant fault-tolerant control system of the software. System of high reliability and high efficiency, is widely used in petrochemical, oil refining, petroleum, chemical, electric power, rail transportation, aerospace, nuclear industry and other…
APPLICATIONS • Emergency Shutdown (ESD) • Burner Management Systems (BMS) • Fire and Gas Systems (F&G) • High Integrity Pressure Protection systems (HIPPS) • Turbomachinery Controls (TMC) • Critical Control We currently stock over 100+ branded products. ---Westinghouse:OVATIONN system, WDPF system, WESStation system card. ---Modicon: Quantum 140 Series processor, control card, Power module and so on. ---Rockwell Allen-Bradley: Reliance, SLC500/1747/1746,…
SIMOREG DC Master Converter, with microprocessor for single-quadrant drives B6C connection input: 460V 3AC, 75 A controllable: Field rectifier D550/90 MRE-GEE6S22 output: DC 550V, 90A Output US-Rating: 500 V DC, 60A Field-input. 460V-output. 375V, 10 A
SIMOREG DC Master Converter, with microprocessor for 4-quadrant drives Circuit (B6) A (B6) C input: 460V 3AC, 50 A controllable: Field rectifier D480/60 MREQ-GEG6V62 output: DC 480V, 60A Output US-Rating: 500 V DC, 30 A Field-input. 460V-output. 375V, 10 A
SIMOREG DC Master Converter, with microprocessor for 4-quadrant drives Circuit (B6) A (B6) C input: 460V 3AC, 25A controllable: Field rectifier D480/30 MREQ-GEG6V62 output: DC 480V, 30 A Output US-Rating: 500 V DC, 15 A Field-input. 460V-output. 375V, 5 A
SIMOREG DC Master Converter, with microprocessor for single-quadrant drives B6C connection input: 460V 3AC, 25A controllable: Field rectifier D550/30 MRE-GEE6S22 output: DC 550V, 30 A Output US-Rating: 500 V DC, 15 A Field-input. 460V-output. 375V, 5 A
FEATURES : Built in auxiliary motor control Operation of up to three (3) line-started motors in addition to the motor controlled directly by the PowerFlex 400 drive When auxiliary motor control is enabled, the internal PID controller in the powerFlex 400 uses a reference and feedback signal to adjust the speed of the drive controlled motor such that the feedback…
FEATURES : This drive provides excellent torque at low speeds for demanding speed control applications and has configurable control modes for a wide variety of applications The PowerFlex 700H also has an ATEX certified option for drives that operate in potentially explosive environments DriveGuard safe torque-off/EN954-1 Cat. 3 No HIM/blank cover Manual documentation No brake IGBT Without drive mounted brake…
Embedded control technology that supports the manipulation of discrete outputs and drive control functions, while using discrete inputs and drive status information onboard the drive Allows the drive to keep track of information that affects the life of its cooling fans and relay outputs, the drive can also be programmed to monitor the run time hours for machine or motor…
The ControlNet network is an open, control network for real-time, high-throughput applications. The ControlNet network uses the Common Industrial Protocol (CIP) to combine the functionality of an I/O network and a peer-to-peer network providing high-speed performance for both functions. The ControlNet network gives you deterministic, repeatable transfers of all mission-critical control data in addition to supporting transfers of non-time-critical data.…
Energy storage modules - 1756-ESMCAP capacitor energy storage module (removable, ships installed with every controller), 1756-ESMNSE capacitor energy storage module (removable, no residual WallClockTime power backup), 1756-ESMNRM capacitor energy storage module (nonremovable, secures controller by preventing USB connection an d SD card use) Standards: C/US UL listed, TÜV certified, CE-ATEX, CE-EMC, CE-MACH, C-tick, KCC certified, ROSTECHNADZOR
Advanced instruction set based on PLC-5 mid-size processors 107 programming instruction Standards: GOST_R certified, KCC certified, MARINE-BVS certified, MARINE-DNV certified, MARINE-GL certified, MARINE-KRS certified, ROSTECHNADZOR certified, UL listed, cUL listed, CE marked, C-Tick certified Applications: For material handling, HVAC control, assembly operations, small process control and SCADA
Requires 2 modules per system Standards: C/US UL listed, CSA certified, CE-ATEX, CE-EMC, C-tick, FM-US, FM-US_HAZ, KCC certified, ROSTECHNADZOR Allen-Bradley 1756-RM2 ControlLogix Redundancy Module, Single Channel (1 Transmit and 1 Receive Fiber), up to 10km and up to 1000 Mbps Max, can be used in ControlLogix SIL2 applications.
Store and retrieve a single program SLC 5/03 thru 5/05 Compatible with MicroLogix 1000, 1100, 1200, and 1500 controllers Standards: C/US UL listed, CE/C-tick compliant Applications: For use with microLogix 1000, 1100, 1200 And 1500 controllers
Provides an interface between a computer's universal serial port (USB) and DH-485 ports on SLC500, microLogix, compactLogix, panelView, AIC and AIC+ products 2 ports: USB, DH-485 Standards: ROSTECHNADZOR Applications: USB to DH-485 converter
The controller consists of a single design to regulate brush-less permanent magnet excited generators and brush-less self excited generators Performs voltage regulation via control of exciter field current provided to the generator stator Three communication ports: redundant ControlNet connector, RS-232 port for dedicated communication with a redundant CGCM, RS-232 port for factory configuration and test (not for customer use) Standards: C/US…
The 1734D series is a set of din-rail mounted products with an integrated DeviceNet communication interface, various combinations of onboard I/O points, removable terminations, and a PointBus expansion port. The DeviceNet interface presents the integrated I/O as a single DeviceNet node while expansion I/O modules will appear as separate nodes. The 1734D series includes a nonisolated DeviceNet communication interface. The…
Non-isolated Configurable channels allow the module to be used with a variety of sensors Selectable input filters, lower filter settings provide greater noise rejection and resolution, higher filter settings provide faster performance On-board scaling eliminates the need to scale the data in the controller, controller processing time and power are preserved for more important tasks, such as I/O control, communications,…
Individually configurable channels allow the module to be used with a variety of sensors Selectable input filters on many modules allow to select from several different filter frequencies for each channel, lower filter settings provide greater noise rejection and resolution, higher filter settings provide faster performance Single-ended or differential inputs depending on module, analog modules have single-ended inputs while isolated…
The 1746-SIM I/O Simulator generates program inputs, allowing you to conveniently simulate programs for testing and troubleshooting applications either prior to installation or remotely. The unit is compatible with all SLC 16-point, 24V DC sourcing or sinking modules. The simulator is designed for simple installation via an RTB-type connector. Wiring instructions are printed on the unit itself, so the information…
Allen-Bradley 1771 PLC-5 System 1771-P4S 1771P4S,1771 PLC-5 System, Power Supply, Slot, 8A, 120V AC . Allen-Bradley PLC-5 system was the most popular of the Allen-Bradley PLC lines. Because it was so reliable and versatile, the PLC-5 has survived the test of time. Qualitrol International provides remanufactured and hard-to-find replacement parts for the Allen-Bradley PLC-5 family.
Our Bulletin 1756 ControlLogix® I/O Chassis-Based Modules provide a full range of digital, diagnostic digital, analog, motion control, and specialty I/O to meet your application needs. You can use any of the I/O modules in the local chassis of a ControlLogix controller or in a chassis linked to a ControlLogix controller across ControlNet™ or EtherNet/IP™ networks.
The Allen-Bradley 1756-IF4FXOF2F supports On-board data alarming, Scaling to engineering units, Real-time channel sampling, IEEE 32-bit floating point or 16-bit integer data formats. Removable Terminal Block Housing: 1756-TBCH or 1756-TBS6H.
SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-,3-,4-wire; 4...20mA with HART-interface; double action; polycarbonate enclosure with fixable slipping clutch with explosion protection (ATEX/IECEx/FM/CSA); Intrinsic safety Connection thread el.: M20x1.5 / pneu.: 1/4" NPT without limit monitor with installed position feedback module (4 ... 20 mA) . Brief instructions German / English / Chinese . without mounted…
The built-in heater assembly of the probe can be replaced on site, reducing maintenance costs (ZR22G only). The probe uses a long-life, high-reliability, field replacable Zirconia sensor. Remote maintenance using digital communications (HART) reduces maintenance costs. The ZR22G separate-type detector uses a high-reliability zirconia sensor, and its heater assembly can be replaced on site. The detector is mounted, for example,…
The built-in heater assembly of the probe can be replaced on site, reducing maintenance costs. The probe uses a long-life, high-reliability Zirconia sensor. The integrated type ZR202S integrates both probe and converter, to reduce wiring, piping, and installation costs. The ZR202S unit uses an optical switch for ease of operation at the site. Remote maintenance using digital communications (HART) reduces…
Reduces installation costs Infrared switch operation Zirconia sensor and heater assembly can be replaced in the field Can measure either oxygen concentration or humidity Remote maintenance using digital communications (HART) reduces maintenance costs.
The separate type converter ZR402G incorporates a LCD touchscreen for ease of operation. The built-in heater assembly of the probe can be replaced on site, reducing maintenance costs (ZR22G only). The probe uses a long-life, high-reliability, field replaceable Zirconia sensor. Remote maintenance using digital communications (HART) reduces maintenance costs. The ZR402G converter is equipped with an LCD touch screen which…
SIMATIC CFC V8.0, software Upgrade from V7.1 to V8.0, Floating license for 1 user E-SW, SW and documentation on CD, License Key on USB stick, Class A, 6 languages (de,en,fr,it,es,ch), executable on WIN XPPROF SP3/ WINSRV2003R2 SP2/ WIN Vista SP2 32 bit/ WIN7 ULT SP1/WIN7 Prof SP1/ Server 2008 R2 SP1 Reference HW: PC/PG
SIMATIC PCS 7, software Upgrade Package OS Server ASIA from V7.1 to V8.0 Single license for 1 installation R-SW, without SW, without documentation License Key on USB stick, Class A, 2 languages (en, cn), executable on Server 2003 R2/Server 2008 R2 Reference HW: PCS 7 IPC Bundle
SIMATIC PCS7, software OS software, Upgrade V4.X to V5.2 valid for OS single station OS-Server, OS-Client and OS-Engineering, on CD-ROM Upgrade license on multi-authorization diskette to be ordered individually per OS package
SIMATIC PCS7, SOFTWARE OS-SOFTWARE UPDATE V5.X TO V5.2 FOR OS-SINGLE STATION, OS-SERVER, OS-CLIENT AND OS-ENGINEERING ON CD ROM TO BE ORDERED SEPARATELY FOR EACH OS-PACKAGE
PC adapter USB A2 USB adapter (USB V2.0) for connection of a PG/PC or notebook to SIMATIC S7 via PROFIBUS or MPI contain USB cable 5 m, MPI cable 0.3 m can be used under Windows XP/Vista/ Windows 7 32/64-bit and higher
Draw-out circuit breaker with slide-in module frame 4-pole, Size 2, IEC In=2000 A to 690 V, 50/60 Hz AC Icu=66 kA at 500 V Rear vertical connection Overcurrent release ETU 45 LSIN protection adjustable 0.4-1 in with cubicle bus Opt.: Comm. /measuring func./ground fault/ ZSS With manual operating mechanism with storage with mechanical request With 1st auxiliary release Shunt release…
Fixed-mounted circuit breaker 4-pole, Size 1, IEC In=800 A up to 690 V, 50/60 Hz AC Icu=55 kA at 500 V Rear horizontal connection Overcurrent release ETU 25 LSI protection adjustable 0.4-1 in With manual operating mechanism with storage with mechanical request without 1st auxiliary release without 2nd auxiliary release 2NO+2NC
Fixed-mounted non-automatic air circuit chamber 3-pole, Size 1, IEC In=630 A to 690 V, 50/60 Hz AC Icu=55 kA at 500 V Rear vertical connection without overcurrent release With manual operating mechanism with storage with mechanical request without 1st auxiliary release without 2nd auxiliary release 2NO+2NC
Fixed-mounted circuit breaker 3-pole, Size 2, IEC In=2500 A to 690 V, 50/60 Hz AC Icu=80 kA at 500 V Rear horizontal connection Overcurrent release ETU 15 LI protection adjustable 0.5-1 in Motorized/manual operating mechanism with memory Drive motor AC 50/60 Hz 208-240 V or 220-250 V DC Activation AC 50/60 Hz 230 V, 220 V DC With 2nd auxiliary…
SIMATIC Telecontrol, software Server Runtime V7.0 for WIN CC (256 stations), Single License for 1 installation R-SW, SW and documentation on CD, License Key on USB stick, Class A, 2 languages (de, en), executable on WINSRV 2003 R2/WINSRV 2008 R2 Reference HW: PC/PG
SIMATIC Telecontrol, software Server Runtime V7.0 for WIN CC (12 stations), Single License for 1 installation R-SW, SW and documentation on CD, License Key on USB stick, Class A, 2 languages (de, en), executable on WINSRV 2003 R2/WINSRV 2008 R2 Reference HW: PC/PG
Notice: Ordering of components only possible in connection with a Legacy System Services contract . . SIMATIC PCS 7, software SIMATIC BATCH PO Option V7.0 (100 units) Single license for 1 installation R-SW, without SW, without docu. License key on FD, Class A 3-languages (de, en, fr), executable under XPProf/ WinSrv2003 Reference HW: PCS 7 547C: ES/OS, Server
Notice: Ordering of components only possible in connection with a Legacy System Services contract . . SIMATIC PCS7, software SIMATIC BATCH Separation Procedure/Formulas V7.0 Single license for 1 installation R-SW, without SW, without docu. License key on FD, Class A 3-languages (de, en, fr), executable under XPProf/ WinSrv2003 Reference HW: PCS 7 547C: ES/OS, Server; PCS 7 Box 416
• Emergency Shutdown (ESD) • Burner Management Systems (BMS) • Fire and Gas Systems (F&G) • High Integrity Pressure Protection systems (HIPPS) • Turbomachinery Controls (TMC) • Critical Control
Invensys Foxboro: I/A Series system,FBM(input / output modules) sequential control,Ladder logic control, Accident recall processing,Digital-to-analog conversion,Input / output signal processing, Data communication and processing Invensys Triconex: Redundant fault-tolerant control system,the most modern fault-tolerant controller based on triple-module redundancy (TMR) architecture
The Tricon controller has been certified as complying with multiple internationally recognized standards by the following internationally recognized certification agencies, these certifications have qualified the Tricon for use around the world in safety critical applications.
SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-,3-,4-wire; 4...20mA with HART-interface; single action; polycarbonate enclosure with fixable slipping clutch with explosion protection (ATEX/IECEx/FM/CSA); Intrinsic safety Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT without limit monitor without option module . Brief instructions German / English / Chinese . without mounted pressure gauge block
SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; single action; polycarbonate enclosure with fixable slipping clutch without explosion protection Connection thread el.: M20x1.5 / pneu.: G 1/4 without limit monitor without option module . Brief instructions German / English / Chinese . without mounted pressure gauge block
SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA with HART-interface; single action; polycarbonate enclosure with fixable slipping clutch without explosion protection Connection thread el.: M20x1.5 / pneu.: G 1/4 without limit monitor without option module . Brief instructions German / English / Chinese . without mounted pressure gauge block
Industrial contr. SIPART DR19 96mm*96mm basic unit with k-output and s-output 1 analog input (tc/rtd/r), 2 digital inputs and outputs operating voltage uc 24V with setpoint profile
The PROPLUS YPP7000 Temperature Meter accepts J, K, T, E, R, S, B, N, C thermocouple types and 100 or 1000 Ω Platinum, 10 Ω Copper, 120 Ω Nickel RTDs. It can be configured to have either a 1° or 0.1° display resolution on any type of sensor input.
The Yokogawa YPP6400 is a multipurpose, easy-to-use high voltage and current input meter ideal for measuring direct voltage and current or the output from voltage shunts and current transformers. It has one 0-300 VAC or VDC voltage input and one 0-5 AAC or ADC current input. The meter may be used with a single voltage or current input, or to…
The PROPLUS YPP6310 is an easy to use batch controller ideal for simplifying independent batch control operations where local control is preferred to expensive and expansive plant operation systems. Inputs include Pulse, Open Collector, NPN, PNP, TTL, Switch Contact Sine Wave (Coil), and Square Wave.
The PROPLUS YPP6210 is an easy to use batch controller ideal for simplifying independent batch control operations where local control is preferred to expensive and expansive plant operation systems. Inputs include 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, and ±10 V.
The YPP6200 Meter is specifically designed for displaying flow rate and total from a flowmeter with an analog output, such as 4-20 mA or 0-10 V. The YPP6200 is particularly well suited for flow applications because of its six-digit, dual-line display that can be programmed for a wide variety of display configurations.
The PROPLUS YPP6100 is a multipurpose, easy to use digital strain gauge & load cell meter ideal for weighing and force measurement applications. It accepts mV input signals up to 300 mV. The basic model includes an isolated 5 or 10VDC Sensor power supply that can be used to power the input Sensor or 24 VDC for other devices.
The PROPLUS YPP6060 Dual-Input Process Meter accepts two simultaneous inputs of 0-20mA, 4-20mA, 0-5V, 1-5V, and +/- 10V. Additional math features include addition, difference, average, multiplication, division, min., max., weighted average, ratio, concentration, & more.
The PROPLUS YPP6000 Process Meter accepts inputs of 0-20mA, 4-20mA, 0-5V, 1-5V, and +/- 10V. Additional features include 32-Point, Square root, or Exponential Linearization.
With the simple turn of a knob, the FVX110 field indicator displays data on up to 16 process values from FOUNDATION™ fieldbus devices. The easy to read LCD display with LED backlighting makes this a very user friendly instrument. In addition, PID function blocks as well as ｌink master and software download functions are provided as standard FVX110 features.
The YPP6870 is a rugged, loop-powered meter with 1" display digits in an explosion-proof enclosure for demanding applications in hazardous areas or in the harshest environmental conditions. The meter derives all of its power from the 4-20 mA loop with a small 1 volt drop for easy installation in almost any system. It is programmed using four easy to access…
The YPP6830 is a rugged, explosion-proof loop-powered rate/totalizer designed for demanding flow applications. It brings modern design, easy readability, and enhanced functionality to hazardous areas around the world in a way never seen before. Other meter designs have lost sight of the fact that the primary thing operators want to do with meters such as these is to look at…
The YPP6820 is a rugged, explosion-proof loop-powered rate/totalizer designed for demanding flow applications. It brings modern design, easy readability, and enhanced functionality to hazardous areas around the world in a way never seen before. Competitors have lost sight of the fact that the primary thing customers want to do with meters such as these is to look at them. They…
The YPP6801 explosion-proof level meter brings modern design, easy readability, and enhanced functionality to hazardous areas around the world in a way never seen before. The YPP6801 features a clearly labeled feet and inches display. The feet and inches display is easily read and understood, providing quick and easy to comprehend information to operators. The meter can display in eighths…
MLD series loop indicators are designed to meet FM standards for use in hazardous locations. The Model MLD field mounted indicators receive DC voltage or curent signal inputs from electroniic transmitters and indicate process mearsurement values. Mounting options are horizontal or vertical pipe mounting.
The MLX is the latest addition to Yokogawa's family of loop powered indicators operating from a 4-20 mA DC input. This model uses the same explosion proof housing as the MLA and MLD, and incorporates the LCD display from the EJX pressure transmitter. The display itself contains a 6 digit numerical display, a 6 digit alphanumeric display for engineering units…
The EJXC40A Digital Remote Sensor (DRS) transmitter connects two pressure sensors, the master sensor (for high-pressure side) and remote sensor (for low-pressure side) with DRS dedicated communication cable to measure differential pressure. The DP is transmitted via a 4 to 20 mA analog signal.
The YTA70P delivers the characteristics of both converters and transmitters. It has a space-saving design that offers low cost installation. The HART® 7 protocol allows you to conveniently configure the transmitter using the latest FDT/DTM technology. HART® 7 benefits include long tag, enhanced burst mode, and event notification. The YTA70P is the choice for rail-mounted control applications.
The YTA50 is a head mount temperature transmitter with a single input. The single input accepts thermocouples, RTD, Ohms or a DC millivolt source. All inputs are linearized and converted in to an industrial standard 4 to 20 mA DC output for transmission to your system. YTA50 is the choice for your monitoring applications.
The YTA70 delivers all the benefits found in the YTA50 while adding HART® digital protocol communication. The HART® protocol allows you to conveniently configue the transmitter using the latest FDT/DTM technology. The YTA70 is the choice for all your control applications.
The YTA110/310 is a field-mount temperature transmitter that accepts a single sensor input and YTA320 is a dual inputs. This input can be from a RTD, thermocouple, ohm, or DC millivolt. These models support BRAIN communication protocol. Dual input functions include Failed Sensor Backup, Temperature Averaging, and Differential Temperature.
The YTA710 provides high accuracy, stability, and reliability. The housing structure adopts reliable dual-compartment structure. The sensor input can be choice of single or dual inputs. This input can accept the RTD, thermocouple, ohm, or DC millivolt. It converts the sensor input to a 4 to 20mA DC analog signal or Fieldbus digital signal. HART® 7 Protocol, BRAIN Protocol or FOUNDATION™…
The YTA610 provides high accuracy, stability, and reliability. The housing structure adopts reliable dual-compartment structure. The sensor input can be choice of single or dual inputs. This input can accept the RTD, thermocouple, ohm, or DC millivolt. It converts the sensor input to a 4 to 20 mA DC analog signal or Fieldbus digital signal. HART® 7 Protocol or FOUNDATION™ Fieldbus…
The EJX-A series is Yokogawa's premium performance line of DPharp transmitters. Released in 2004, it offers the performance and stability needed in demanding applications. The EJX-A series performance makes it the thoroughbred of the DPharp family of pressure transmitters. The EJX115A is Differential Pressure Transmitter in the series optimized for low flow applications with the addition of an Integral Flow…
The EJA-E series of transmitters is Yokogawa's most recent evolution of the DPharp family of pressure transmitters. Released in 2012, it combines the ruggedness and success of the work-horse EJA-A series with the performance of the thoroughbred EJX-A series to deliver the type of product you have come to expect from Yokogawa. The EJA115E is Differential Pressure Transmitter in the…
