• Brand : Allen-Bradley
• Series : 2097
• AC input voltage : 80…132V rms single-phase (120V nom), 80…264V rms single-phase (240V nom), 80…264V rms three-phase (240V nom)
• AC input frequency : 48…62 Hz
• Main AC input current, Nom (0-pk) : 136 A
• Main AC input current, Nom (rms) : 3.0 A
• Integrated AC Line Filter : No
• Control power back-up input voltage : 20…26V DC
• Control power back-up input current, max. inrush : 30 A
• Control power back-up input current, nominal : 500 mA
• Continuous output current (rms) : 2.0 A
• Continuous output current (0-pk) : 2.8 A
• Peak output current (rms) : 6.0 A
• Peak output current (0-pk) : 8.5 A
• Continuous power output(240V nom or 120V ) : 0.50 kW
• Shunt on : 390V DC
• Shunt off : 375V DC
• Dimensions : 9.37 x 7.29 x 3.06 in (238 x 185.1 x 12.38 mm)
• Weight : 2.9 lbs (1.3 kg)

The 2097-V33PR1-LM is a Single-Axis Servo Drive from the Kinetix 350 series, manufactured by Allen-Bradley. It provides an Ethernet/IP solution for applications with 2.8A of current rating and 0.5kW of power rating. This drive should be supplied with a 120 Volt AC single-phase input or a 240 Volt AC single and three-phase voltage. This module’s AC line filter is not integrated, although filters can be additionally mounted (foot mount and side mount). The 2097-V33PR1-LM represents a cost-effective solution for applications with low axis-count motion control. This servo drive usually communicates over an IP network with the ControlLogix controllers. Combined together, these two Allen-Bradley products provide a cost-effective motion control system with high performance and scalability that are always desired in the automation industry.

The 2097-V33PR1-LM servo drive has an internal solid-state motor short-circuit protection. It supports undervoltage and overvoltage detection too. Motor overload protection is implemented as “thermal memory”. This system predicts motor temperature by following operating conditions as long as control power is constantly present. This Kinetix 350 single axis Ethernet/IP servo drive comes enclosed with an IP20 rating and its dimensions are 185.1 millimeters (7.29 inches) x 238.0 millimeters (9.37 inches) x 68.0 millimeters (2.68 inches). Please note that a minimum of 25 millimeters of clearance must be kept on upper and lower sides of the drive and 3 millimeters of side clearance to control airflow and regulation of the device’s heat dissipation. During installation isolate input power wiring and motor power cables from control feedback signaling cables.