• Brand : Allen-Bradley
• Series : 2097
• AC input voltage : 80…132V rms single-phase (120V nom), 80…264V rms single-phase (240V nom), 80…264V rms three-phase (240V nom)
• AC input frequency : 48…62 Hz
• Main AC input current, Nom (0-pk) : 2.3 A
• Main AC input current, Nom (rms) : 5.0A
• Integrated AC Line Filter : No
• Control power back-up input voltage : 20…26V DC
• Control power back-up input current, max. inrush : 30 A
• Control power back-up input current, nominal : 500 mA
• Continuous output current (rms) : 4.0 A
• Continuous output current (0-pk) : 5.7 A
• Peak output current (rms) : 12.0 A
• Peak output current (0-pk) : 17.0 A
• Continuous power output(240V nom or 120V ) : 1.00 kW
• Shunt on : 390V DC
• Shunt off : 375V DC
• Dimensions : 9.37 x 7.29 x 2.70 in (238 x 185 x 69.0 mm
• Weight : 3.3 lbs (1.5 kg)

The Allen-Bradley Kinetix 300 Drive 2097-V33PR3 is an Ethernet I/P Indexing Servo Drive. This Servo drive is used to seamlessly interface with Allen-Bradley’s MP and TL series motors and actuator devices. This servo drives feature an integrated Safe Torque-Off functionality which prevent the drive from restarting after safety circuit has tripped. Additionally, the 2097-V33PR3 has integrated Overvoltage protection rated at 850V DC and short-circuit current protection rated at 100,000 A (rms) symmetrical.

The 2097-V33PR3 Kinetix Servo Drive has an continuous output current and power of 5.7 A and 1.0 kW respectively while the servo drive’s input voltage supports a variety of Voltage class and ranges specifically, 80-132VAC, 1-phase, 80-264VAC, 1-Phase and 80-264VAC, 3-Phase with nominal values of 120VAC and 240VAC, respectively along an input frequency 48-62 Hz.

This Kinetix servo drive is designed to be installed with drive accessories such as AC line filters for limiting AC line noise and ripples, Terminal block for I/O connector, Shunt resistors, Memory module programmer for configuration of memory module and Memory module for automatic drive replacement.

The 2097-V33PR3 has an Ethernet I/P communication port that supports implementation of motion over Ethernet I/P and control MP-Series and TL-Series servo motors and actuators. This same port supports simultaneous communication with Remote I/O devices, CompactLogix controllers and Human Machine Interfaces (HMI). Using Allen-Bradley’s Integrated Architecture system, seamless integration to Logix controllers is achievable.

The 2097-V33PR3 is a Kinetix drive that may be operated with 1-Phase and 3-Phase input supply voltage.. It has specifications of 120/240 Volts drive voltage, 5.7 A continuous output current, and ISO 13849-1 Safety Category 3 Performance Level D. This product will require a 1/3, rear-mount Bulletin 2097 AC line filter to meet CE requirements.