• Brand : Allen-Bradley
• Series : 2097
• AC input voltage : 320…528V rms three-phase (480V nom)
• AC input frequency : 48…62 Hz
• Main AC input current, Nom (0-pk) : 22.6 A
• Main AC input current, Nom (rms) : 7.9 A
• Integrated AC Line Filter : No
• Control power back-up input voltage : 20…26V DC
• Control power back-up input current, max. inrush : 30 A
• Control power back-up input current, nominal : 500 mA
• Continuous output current (rms) : 6.0 A
• Continuous output current (0-pk) : 8.5 A
• Peak output current (rms) : 18.0 A
• Peak output current (0-pk) : 25.5 A
• Continuous power output(240V nom or 120V ) : 3.00 kW
• Shunt on : 780V DC
• Shunt off : 750V DC
• Dimensions : 9.37 x 7.29 x 3.72 in (238 x 185 x 94.0 mm)
• Weight : 4.0 lbs (1.8 kg)

The Allen-Bradley 2097-V34PR6-LM part of the Bulletin 2097 Kinetix 350 Single-Axis Ethernet I/P Servo drive. This drive is operated by supplying an external supply voltage of 320-528VAC 3-phase along a frequency range of 48-62 Hz and input current of 7.9 A, nominal. The output characteristics of the 2097-V34PR6-LM servo drive includes continuous output current (rms) of 6.0 A, Continuous output current (0-pk) of 8.5 A, Peak output current (rms) of 18.0 A and Peak output current (0-pk) of 25.5 A. The drive’s output power rating is 3,0 kW at nominal voltage of 480VAC.

This Kinetix Drive has built-in Safe Torque-Off functionality which is certified for use in applications requiring up to ISO 13849-1 performance level d (PLd) safety category 3.Additionally, this Kinetix drive is also provided with an internal Overvoltage protection and short-circuit current protection which mainly protects the device and the connected process.

The 2097-V34PR6-LM Kinetix supports seamless integration with MP-series and TL-series servo motors and actuators. Aside from the mentioned motors and actuators, integration with Allen-Bradley visualization products such as PanelView operator terminals, distributed I/O elements specifically Allen-Bradley 1734 Point I/O remote I/O modules and Logix Automation controller platforms is possible through the embedded Ethernet I/P interface.

When installing the 2097-V34PR6-LM, the minimum mounting clearances must be met to promote an adequate air flow. Specific clearance requirements include 25.0 mm (1.0 in.) for top and bottom clearance, 3 mm (0.12 in.) for side clearances. Depending on the accessory devices installed, additional clearances may need to be added to maintain proper air flow.