• Brand : Allen-Bradley
• Series : 2098
• Product Type : Digital Servo Drive
• AC Input Voltage : 100-240V AC
• AC Input Frequency : 47-63 Hz
• Main AC Input Current : 28 A
• Continuous Output Current : 15 A
• Continuous Power Output : 1.5 kW
• Bus Overvoltage : 452V DC
• Shunt On : 420V DC

The DeviceNet enabled 2098-DSD-030-DN digital servo drive from Allen-Bradley is a widely used device in different industries. It comes from the Allen-Bradley Ultra 3000 series of servo drives. The 2098-DSD-030-DN servo drive uses the standard factory control options. The DeviceNet interface in the drive has access to 100% of the parameters on the network. The autobaud feature in the interface makes the initial connection process in the drive easier. The AC input frequency of the drive lies between 47 and 63 Hertz. The drive has a main AC input current of 28 Amps. The 2098-DSD-030-DN servo drive is equipped with 8 optically isolated digital inputs ranging from 12 to 24 Volts DC with current sinking. Also, the drive has 4 optically isolated digital outputs with current sourcing. The relay output of the drive has one normally-open relay with 30 Volts DC maximum and 1 Amp.

The 2098-DSD-030-DN servo drive needs an ambient operating temperature ranging from 0 to 55 degrees Celsius in a relatively humid environment with non-condensing humidity. The 2098-DSD-030-DN servo drive uses a 44-pin high density female D-sub connector for user input/output. For the motor feedback connector, the servo drive uses a 15-pin high density female D-sub connector. The drive also uses a 9-pin female D-sub connector for serial port connection. The drive runs perfectly at an altitude of up to 1500 meters above sea level without getting derated. The 2098-DSD-030-DN servo drive has no auxiliary power supply. The drive operates with the intelligent Logix platform connected with the SERCOS interface to perform a wide variety of tasks. The drive makes use of smart motor technology for automated identification for modern industrial needs.