• Brand : Allen-Bradley
• Series : 2098
• AC Input Voltage : 230-480V AC
• AC Input Frequency : 47-63 Hz
• Main AC Input Current : 28 A
• Continuous Output Current : 47 A
• Continuous Power Output : 11 kW
• Bus Overvoltage : 810V DC
• Shunt On : 800V DC

The 2098-DSD-HV220X servo drive is an Allen-Bradley digital servo drive. It comes from the Ultra 3000 family of servo drives. It has a voltage rating which lies between 230 to 480 Volts AC. The drive is powered from a 3-phase power supply and it runs with a frequency range of 47 to 63 Hertz. The drive uses the standard interface and it uses an 800 Volts DC shunt voltage. The drive operates with a continuous output current of 47 Amps and a continuous power output of 11 kilowatts. The drive has a compact build and it can fit into any small factory location. The main AC input current that is used in the drive is 28 Amps. The 2098-DSD-HV220X servo drive is widely used in control systems in different industries. It supports different Allen-Bradley peripheral devices. For internal communication, this digital drive is equipped with an RS-232 port or RS-485 port which uses DeviceNet as the main communication interface. The DeviceNet interface features flexible fault configuration which lets the adapter be programmed for fault-based actions such as the ramp to stop, coast to stop, and the hold last state action and it also supports user-configurable logic and speed reference value.

The 2098-DSD-HV220X servo drive is an indoor-rated device and it should be protected from water sprays. It has no IP certification for water resistance. The drive should be properly grounded before the installation. The communication interface and the encoder can be affected by the noise radiated from different electronic devices. Such devices should be kept far away from the 2098-DSD-HV220X servo drive. The 2098-DSD-HV220X servo drive uses standard high-density D-shell connectors for signal connections. There are 8 selectable general-purpose inputs. The drive has built-in support for absolute encoders to supply the external logic power to maintain the drive’s position when there is a loss of power.