Automation Pioneer

Allen-Bradley 1756-OF8H Analog Output Module 1756OF8H

$8,380.00

AVAILABILITY: Generally allow 7-10 days to ship

7 in stock

SKU: 1756-OF8H Category: Tag:

Description

Allen-Bradley 1756-OF8H Analog Output Module 1756OF8H

  • Extended Product Type: PLC
  • Product ID: 1756-OF8H
  • Allen-Bradley Type Designation: PLC

Description of Allen-Bradley 1756-OF8H Output Module

ControlLogix Analog Output Module, Number Of Channels: 8, Output: Plus/Minus 10.4 V, 0 – 20 MA, 4 – 20 MA, Voltage Rating: Overvoltage Protection: Plus/Minus 24 VDC, Current Rating: Drawn: 200 MA At 5 V, 230 MA At 24 V, Isolation: 50 V (Continuous), Basic Insulation Type, Output Channels-To-Backplane, No Isolation Between Individual Output Channels, 1500 VAC For 60 SEC Type Test, Power Rating: Backplane: 6.54 W, Enclosure: Open Type, Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 – 2000 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 1890 MHZ, 1 V/M With 1 KHZ Sine-Wave 80% AM From 2000 – 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ – 80 MHZ On Shielded Signal Ports, Display: Module Health, In Calibration Mode, Interface: Removable Terminal Block, IEEE, Mounting: Chassis, Temperature Rating: 32 – 140 DEG F, Environmental Conditions: Relative Humidity: 5 – 95% Non-Condensing, Vibration: 2 G At 10 – 500 HZ , Shock: 30 G(Operating), 50 G (Non-Operating), Response Time: Open Circuit Detection Time: Current Output Only (Output Must Be Set To Less Than 0.1 MA), Settling Time – Current (No HART): Less Than 23 MS to 95% With Resistive Loads, Current (With HART): Less Than 37 MS to 95% With Resistive Loads, Voltage: Less Than 8.5 MS to 95% With Resistive Loads, Module Output Scan Time: 12 MS Floating Point, Module HART Scan Time: Typically 1 SEC Per HART Channel Enabled, Estimate 10 SEC If All 8 Channels Have HART Enabled, Pass Through Messages, Handheld Communicators, Secondary Masters, Communication Errors, Or Configuration Changes Can Significantly Increase The Update Time, Accuracy: Calibrated – Voltage: Better Than 0.05% Of Range At 25 DEG C, Current: Better Than 0.15% Of Range At 25 DEG C, Power Dissipation: 4.92 W (8 Channel Current), Impedance: Output – Voltage: Greater Than 2 KOHM At 10.4 V, Current: 50 – 750 OHM Drive, Slot Width: 1, Surge Transient Immunity: Plus/Minus 2 KV Line-Earth (CM) On Shielded Signal Ports, Resolution: 15 – 16 Bits, Standard/Approvals: C/US UL listed, CE-ATEX, CE-EMC, C-TICK, GOST_R, KCC certified, MARINE-ABS, MARINE-BVS, MARINE-DNV, MARINE-GL, MARINE-KRS, MARINE-LR, ROSTECHNADZOR, RUS_PAT_APPR, TUV-FS

Specifications of Allen-Bradley 1756-OF8H Analog Output Module

  • Item Name: Analog Output Module
  • Sub Brand: ControlLogix
  • Number Of Channels: 8
  • Output: Plus/Minus 10.4 V, 0 – 20 MA, 4 – 20 MA
  • Voltage Rating: Overvoltage Protection: Plus/Minus 24 VDC
  • Current Rating: Drawn: 200 MA At 5 V, 230 MA At 24 V
  • Isolation: 50 V (Continuous), Basic Insulation Type, Output Channels-To-Backplane, No Isolation Between Individual Output Channels, 1500 VAC For 60 SEC Type Test
  • Power Rating: Backplane: 6.54 W
  • Enclosure: Open Type
  • Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 – 2000 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 1890 MHZ, 1 V/M With 1 KHZ Sine-Wave 80% AM From 2000 – 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ – 80 MHZ On Shielded Signal Ports
  • Display: Module Health, In Calibration Mode
  • Interface: Removable Terminal Block, IEEE
  • Mounting: Chassis
  • Temperature Rating: 32 – 140 DEG F
  • Environmental Conditions: Relative Humidity: 5 – 95% Non-Condensing, Vibration: 2 G At 10 – 500 HZ , Shock: 30 G(Operating), 50 G (Non-Operating)
  • Response Time: Open Circuit Detection Time: Current Output Only (Output Must Be Set To Less Than 0.1 MA), Settling Time – Current (No HART): Less Than 23 MS to 95% With Resistive Loads, Current (With HART): Less Than 37 MS to 95% With Resistive Loads, Voltage: Less Than 8.5 MS to 95% With Resistive Loads, Module Output Scan Time: 12 MS Floating Point, Module HART Scan Time: Typically 1 SEC Per HART Channel Enabled, Estimate 10 SEC If All 8 Channels Have HART Enabled, Pass Through Messages, Handheld Communicators, Secondary Masters, Communication Errors, Or Configuration Changes Can Significantly Increase The Update Time
  • Accuracy: Calibrated – Voltage: Better Than 0.05% Of Range At 25 DEG C, Current: Better Than 0.15% Of Range At 25 DEG C
  • Power Dissipation: 4.92 W (8 Channel Current)
  • Surge Transient Immunity: Plus/Minus 2 KV Line-Earth (CM) On Shielded Signal Ports
  • Resolution: 15 – 16 Bits
  • Impedance: Output – Voltage: Greater Than 2 KOHM At 10.4 V, Current: 50 – 750 OHM Drive
  • Slot Width: 1

Additional information

Weight 8 lbs
Dimensions 10 × 8 × 15 in

Brand

Allen-Bradley

Discover Precision and Reliability with Allen-Bradley Brands. Shop Cutting-Edge Industrial Automation Solutions at Automation Pioneer. Power Up Your Efficiency Today.
#Allen-Bradley industrial automation #Precision automation solutions #Allen-Bradley products online #Cutting-edge industrial tech #Industrial automation excellence #Allen-Bradley robotics #Reliable automation tools #Advanced industrial solutions #Allen-Bradley shop by brands #Efficiency-boosting automation

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.