Uncategorized
Allen-Bradley PLC ControlLogix system 1756IF8IH
Our Bulletin 1756 ControlLogix® I/O Chassis-Based Modules provide a full range of digital, diagnostic digital, analog, motion control, and specialty I/O to meet your application needs. You can use any of the I/O modules in the local chassis of a ControlLogix controller or in a chassis linked to a ControlLogix controller across ControlNet™ or EtherNet/IP™ networks.
Model Type
ControlLogix
ControlLogix
Model Number
1756-IF8IH
Manufacturer(s)
Allen-Bradley
Allen-Bradley
Weight: 1.00 lbs
Additional Information
Our Bulletin 1756 ControlLogix® I/O Chassis-Based Modules provide a full range of digital, diagnostic digital, analog, motion control, and specialty I/O to meet your application needs. You can use any of the I/O modules in the local chassis of a ControlLogix controller or in a chassis linked to a ControlLogix controller across ControlNet™ or EtherNet/IP™ networks.
- Mounts in a ControlLogix® chassis
- Requires either a removable terminal block (RTB) or a Bulletin 1492 wiring interface module (IFM) to connect all field-side wiring
- Includes inherent time-stamping capabilities for sequence of events (SOE) applications
- Offers comprehensive I/O diagnostics for detection of both system and field-side failures
- Provides removal and insertion under power (RIUP) for ease of maintenance
- Offers electronic keying to help prevent replacement errors
- Includes I/O wizards in the Studio 5000™ Logix Designer application to enable quick and easy module configuration
- Offers a variety of voltages
- Provides 8 to 32 points per module
- Offers isolated and non-isolated module types
- Includes point-level output fault states
- Offers direct-connect or rack-optimized communication
- Offers field-side diagnostics on select modules
- Includes input, output, and combination modules
- Provides thermocouple and RTD modules
- Includes on-board data alarming
- Offers scaling to engineering units
- Provides real-time channel sampling
- Offers electronic module keying, and is software configurable
- Includes mechanical RTB keying, user-defined
- Offers per channel configuration for voltage, current or 2-wire transmitter current sourcing
- Offers Per channel configuration for either RTD or Thermocouple
- As of March 31, 2017, the ControlLogix 1756 Isolated Analog I/O 6-channel modules will be discontinued and no longer available for sale. Customers are encouraged to migrate to the 1756 Isolated Analog I/O 8-channel modules using the Migrating 6-channel to 8-channel 1756 Analog Modules Migration Guide
- Includes configurable flow meter modules
- Provides high-speed counter modules
- Offers programmable limit switch modules
- Provides a flexible interconnection between plant wiring and I/O modules
- Includes screw-clamp or spring-clamp terminations
- Not shipped with I/O modules; you must order separately
- Includes channel-to-channel isolation
- Offers HART modem per channel for faster HART data update
- Offers basic field device configuration via the Add-on Profile
- Helps eliminate the need for field isolating barriers when using isolated modules
- Offers 8- or 16-channel density modules
- Offers increased accuracy, repeatability, stability, and precision
- Includes isolated 8-channel and non-isolated 12- and 16-channel modules with stability over the entire temperature operating range
- Does not require field calibration
- Offers advanced precision using 24-bit design
- Includes per channel status and fault LED annunciation
- Offers SIL 1, systematic capability 2, type certified for use in a ControlLogix SIL 2 architecture
- Offers an emulation mode that helps enable customers to migrate from 6-channel applications
- Implements network-based access control for users, devices, and networks in the 1756 chassis
- Offers security modules to encrypt important information shared between controllers and servers to prevent tampering
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.