-
Accurate and stable pressure measurement
-
Robust stainless steel wetted parts
-
Suitable for liquid and gaseous media
-
Wide temperature compensation range
-
Compact, vibration-resistant design
-
Standard electrical interface for control systems
-
CE certified and industrial grade
Technical Specifications
| Parameter | Specification |
|---|---|
| Danfoss Part No. | 060G1967 |
| Model | AKS 33-DG31-B1EC04-0 |
| Pressure Type | Gauge / Differential (verify per system) |
| Pressure Range | See manufacturer datasheet (example: 0–25 bar) |
| Accuracy | ±1% FS typical (reference Danfoss datasheet) |
| Output Signal | 4–20 mA (2-wire) |
| Supply Voltage | 10–36 V DC |
| Operating Temperature | –40 °C to +85 °C |
| Process Connection | Threaded (e.g., 1/4″ NPT or BSP) |
| Electrical Connection | DIN connector / pre-wired cable |
| Wetted Materials | Stainless steel diaphragm and housing |
| Ingress Protection | IP65 / IP67 (verify exact rating) |
| Response Time | ≤ 10 ms |
| Overpressure Protection | Up to XX× rated range (see datasheet) |
| Certifications | CE, RoHS (as applicable) |
Operating Principle
The AKS 33 series uses a precision sensing element protected by a stainless-steel diaphragm that deflects in proportion to applied pressure. This mechanical deformation is converted into a standardized electrical signal (typically 4–20 mA) compatible with PLCs, building automation systems, and HVAC/R controllers.
Typical Applications
-
Refrigeration systems (industrial, commercial)
-
HVAC and air-conditioning pressure monitoring
-
Chillers and heat pump systems
-
Process control systems
-
Boilers and steam monitoring
-
Pump protection and system safety interlocks
Installation Guidelines
-
Mount transmitter in a stable location free from excessive vibration
-
Orient per manufacturer recommendation for best accuracy
-
Use appropriate sealing for the process port
-
Verify electrical wiring polarity before energizing
-
Commission with control system to confirm correct scaling
Environmental and Safety Compliance
-
Designed for industrial environments
-
Meets CE immunity and emission standards
-
Resistant to shock and vibration consistent with relevant industrial norms
-
Wetted parts compatible with common refrigerants and process media
Accessories & Options
-
Electrical Connectors: DIN, cable harness
-
Mounting Hardware: Brackets, clamps
-
Protective Covers: Weatherproof seals
-
Calibration Certificates: Available upon request
Packaging & Shipping
-
Individually boxed
-
Includes:
-
Transmitter unit
-
Identification label with serial number
-
Instruction leaflet
-
-
Optional bulk packaging available for OEM orders
Warranty
Standard manufacturer warranty applies (typically 12 months from installation or 18 months from shipment), subject to Danfoss terms and conditions.
Reviews
There are no reviews yet.