-
High Accuracy and Linearity — Minimal deviation over the operating pressure range ensures reliable control.
-
Robust Construction — Stainless steel wetted parts and durable housing resist harsh environments.
-
Temperature Compensation — Maintains stable output across a wide temperature range.
-
Standard Electrical Interface — Compatible with PLCs, controllers, and monitoring systems.
-
Wide Operating Range — Suitable for low to high pressure applications.
-
Compact and Vibration-Resistant — Designed for industrial installations.
Technical Specifications
| Specification | Detail |
|---|---|
| Manufacturer | Danfoss |
| Part Number (Danfoss) | 060G2047 |
| Model Code | AKS 33-8731-A1BC08-0 |
| Pressure Type | Gauge or absolute (depending on calibration option) |
| Pressure Range | Refer to manufacturer datasheet (custom options available) |
| Accuracy | Typically ±X% of full scale (dependent on exact range) |
| Output Signal | Standard industrial output (e.g., 4–20 mA, voltage output) |
| Supply Voltage | +10 to +36 V DC (typical) |
| Operating Temperature | -40°C to +85°C (typical) |
| Process Connection | Threaded (e.g., 1/4″ NPT, BSP; verify exact spec) |
| Electrical Connection | Circular connector or cable (confirm type) |
| Wetted Materials | Stainless steel diaphragm and pressure port |
| Housing Material | Rugged metal alloy |
| Protection Rating | IP65 / IP67 (verify with datasheet) |
| Response Time | Typically < 10 ms |
| Certifications | CE, RoHS (if applicable) |
| Compliance | Meets industry-standard performance and safety |
Note: Specific values (pressure range, output type, connector style) should be confirmed per your exact part code and Danfoss datasheet.
Operating Principle
The transmitter senses pressure via a sensing diaphragm. Deformation under pressure is converted into an electrical signal by an internal sensor element. The output signal is proportional to applied pressure and is used by control systems for monitoring and automation.
Typical Applications
-
Refrigeration and HVAC system control
-
Compressor monitoring
-
Industrial process automation
-
Pump control systems
-
Pressure safety and protection circuits
-
Building management systems
Installation Guidelines
-
Mount the transmitter where vibration and temperature extremes are minimized.
-
Ensure the process connection is properly sealed (use appropriate thread sealant).
-
Confirm electrical polarity and correct connection before power application.
-
Avoid direct exposure to liquids on the electrical connector.
-
Ground the transmitter per local electrical codes.
Operating Environment
-
Suitable for indoor and protected outdoor environments
-
Resistant to condensation and standard environmental loads
-
Not recommended for continuous immersion (verify IP rating if needed)
Maintenance and Calibration
-
Periodic calibration recommended depending on duty cycle and environment
-
Clean pressure port gently to avoid diaphragm damage
-
Avoid exposure to corrosive chemicals without protective isolation
Packaging and Delivery
-
Supplied in protective packaging to prevent shipping damage
-
Includes part label, serial number, and configuration code
-
Calibration certificate available upon request
Warranty
Standard Danfoss limited warranty applies (typically 12 months), subject to manufacturer terms and conditions.
Reviews
There are no reviews yet.