Honeywell C7061A1012 Flame Sensor Amplifiers

• Extended Product Type: Sensor
• Product ID: C7061A1012
• Honeywell Type Designation: Sensor

Features of Honeywell C7061A1012 Flame Sensor

• Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor to provide the UV sensor tube checking function.
• Can be mounted horizontally, vertically or at any angle in between.
• The detector requires faceplate alignment and has integral locating reference points to assure proper operation of the shutter mechanism.
• Field replaceable ultraviolet sensing tube and quartz viewing window.
• Models with threaded conduit fitting and color-coded leadwires allow rapid electrical installation.
• C7061A1038 or A1046 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.
• Two detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.
• Protective heat block built into mounting flange.
• -40 F (-40 C) rated ultraviolet sensing tube is supplied.
• C7061E meets NEMA 4 standards with viewing window rated to 20 psi.
• C7061F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi

Specifications of Honeywell C7061A1012 Flame Sensor Amplifiers

• Application: Gas fired burners; Oil fired burners
• Used With: Flame Amplifiers: R7861
• Electrical Ratings: 120 Vac
• Mounting: 3/4 in. NPT
• Frequency: 50 Hz; 60 Hz
• Electrical Connections : Color-coded lead wires
• Ambient Temperature Range (C) : -40 C to +79 C
• Lead Length (mm) : 2438 mm