Skip to content- Uncategorized
- SIMATIC ET 200SP, Digital input module, DI 8x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 piece, fits to BU-type A0, Colour Code CC01, input delay time 0,05..20ms, module diagnostics for: short-circuit of sensor supply, wire break, supply voltage
- Read more
- Uncategorized
- SIMATIC S7/M7, cable for point-to-point connections RS232C-RS232C 9-pole sub D socket respectively 10 m length
- Read more
- Uncategorized
- Connecting cable shielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14mm2 with IDC connectors, L = 1.0 m
- Read more
- Uncategorized
- Connecting cable unshielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14mm2 with IDC connectors, L = 0.5 m
- Read more
- Uncategorized
- Front connector module with flat ribbon Cable connection for digital 32 I/O modules of the S7-300, Power supply over Screw terminals
- Read more
- Uncategorized
- SIMATIC ET 200MP. PROFINET IO device Interface module IM 155-5 PN HF, for ET 200MP electronic modules; up to 12 IO modules without PS; up to 30 IO modules with additional PS; Integrated 2-port switch; RJ45 shared device; MRP; IRT >=0.25 ms; Isochronous mode FW update; I&M0...3; prioritized startup, S2 redundancy; shared device with 4 controllers
- Read more
- Uncategorized
- SIMATIC S7-1500, mounting rail 245 mm (approx. 9.6 inch); incl. grounding screw, integrated DIN rail for mounting of incidentals such as terminals, automatic circuit breakers and relays
- Read more
- Uncategorized
- SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED, FOR EXPANDED TEMPERATURE RANGE, 16 DI, 24 V DC, 20 PIN
- Read more
- Uncategorized
- SIMATIC S7/PCS7, SM 322 DIGITAL OUTPUT MODULE, 16 DO, DC 24 V / 0,5A CAPABLE OF DIAGNOSTICS, REDUNDANCY CAPABILITY
- Read more
- Uncategorized
- Connection module TP3 with fuse per channel 8 channels and 2x10 terminals for Potential supply Type: Screw terminal with LED, VPE=1 unit 16 pole IDC connector f. cable
- Read more
- Uncategorized
- Connection module TPRO with relay 24 V DC, Output 8 NO contacts 230V AC/3 A 30 V DC/3 A, Type: Screw terminal with LED, VPE=1 unit 16 pole IDC connection for cable
- Read more
- Uncategorized
- SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, FOR EXPANDED TEMPERATURE RANGE, 16 DO, 24V DC, 0.5 A, 20 PIN
- Read more
- Uncategorized
- SIMATIC S7-300, CPU 315T-2 DP, CENTRAL PROCESSING UNIT FOR PLC AND TECHNOLOGY 128 KBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S 2. INTERFACE DP(DRIVE), INTEGRATED I/O FOR TECHNOLOGY FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD MIN. 4MB NECESSARY
- Read more
- Uncategorized
- SIMATIC DP, PROFINET Interface module IM 154-4 PN, High Feature for ET 200 PRO, Integrated switch, incl. termination module, connection module in PN 6ES7194-4A.00-0AA0 order separately
- Read more
- Uncategorized
- SIMATIC Field PG M5 Advanced; I7-6820EQ (2.8 to 3.5 GHz; 4 kernels+hyperthreading; 8 MB SMART cache); 15.6" display; Full HD (1920x 1080); WLAN 802.11AC & Bluetooth V4.0; DVD +/-RW; HD graphic 530 2x 16 GB DDR4 SD-RAM SO-DIMM 1 TB HDD SATA (2.5"); without S5 interface, without S5-EPROMMER Line cable with power plug: Europe; Keyboard: QWERTZ/QWERTY Windows 10 Enterprise, 64…
- Read more
- Uncategorized
- SIMATIC DP, Electronics module ET 200S: 2 AI High Speed U, 15 bit, 15 mm width, Cycle time of module: 0.1 ms, with SF LED
- Read more
- Uncategorized
- SIMATIC DP, bus module BM IM157 for extended temperature range Bus module for IM157 for the insertion and removal function during operation
- Read more
- Uncategorized
- SIMATIC DP, field device interface DP/PA coupler FDC157-0 not Ex-Version 1000mA/31V Field coupler between PROFIBUS DP and PROFIBUS PA Integrated diagnostics slave can be operated redundant for extended temperature range Degree of protection IP20
- Read more
- Uncategorized
- SIMATIC PCS 7 Redundancy AS in individual components: Without memory card with 2 x CPU 412 H incl. AS RT PO 100)) With 2 x 2 10 m sync module and 2 x 1 m FOC With 2 x CP443-1 IE/PN With 1 x UR2-H (2 x 9 slots) Aluminum rack With 2 x UC 120/230 V 10 A Power…
- Read more
- Uncategorized
- SIMATIC WINAC SPARE PART FOR WINAC SLOT 416 CPU416-2 PCI, 2 X 1,6 MBYTE, DP AND MPI/DP ON BOARD RUNNING UNDER WINDOWS NT/2000, W/O DOCUMENTATION
- Read more
- Uncategorized
- SIMATIC M7-300, CPU388-4 CENTRAL PROCESSING UNIT 80486DX2; 50 MHZ, 8MB RAM MPI, 1 SERIAL INTERFACE, EXP. BUS CONNECTOR
- Read more
- Uncategorized
- SIMATIC PDM, software 1000 tags. Floating license for 1 user, E-SW, without SW, without documentation, License key on USB stick, Class A, Reference HW: PC/PG
- Read more
- Uncategorized
- SIMATIC S5, IP 242A Counter module for detection and Pre-processing fast counter pulses, for S5-115U/-135U/-155U
- Read more
- Uncategorized
- Front connector module with 4x16 pole IDC connector for digital 32 I/O modules of the S7-1500 Potential supply over Screw terminals
- Read more
- Uncategorized
- SIMATIC DP, Electronics module for ET 200S, 1 count 5 V/500 kHz connection of RS422 incremental encoders, operating modes: Measure, Count, 30 mm installation width, 1-channel with clock synchronization
- Read more
- Uncategorized
- SIMATIC S7-400, CPU 414-3 PN/DP Central processing unit with: Work memory 2.8 MB, (1.4 MB code, 1.4 MB data), interfaces: 1st interface MPI/DP 12 Mbit/s,(X1), 2nd interface Ethernet/PROFINET (X5), 3rd interface IF 964-DP plug-in (IF1)
- Read more
- Uncategorized
- SIMATIC S7-1200, CPU 1214C, compact CPU, DC/DC/relay, onboard I/O: 14 DI 24 V DC; 10 DO relay 2 A; 2 AI 0-10 V DC, Power supply: AC 20.4-28.8 V DC, Program/data memory 50 KB
- Read more
- Uncategorized
- SIMATIC S7-300, CPU 314C-2 PTP Compact CPU with MPI, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 4 high-speed counters (60 kHz), integrated interface RS485, Integr. power supply 24 V DC, Work memory 96 KB, Front connector (2x 40-pole) and Micro Memory Card required
- Read more
- Uncategorized
- SIMATIC S7-300, CPU 314 Central processing unit with MPI, Integr. power supply 24 V DC, Work memory 96 KB, Micro Memory Card required
- Read more
- Uncategorized
- SIMATIC S7-1200, CPU 1212C, compact CPU, DC/DC/DC, onboard I/O: 8 DI 24 V DC; 6 DO 24 V DC; 2 AI 0-10 V DC, Power supply: DC 20.4-28.8 V DC, Program/data memory 25 KB
- Read more
- Uncategorized
- SIMATIC S7-400H, 412-3H System bundle H-system with 2 x MC 1 MB RAM, 1 x UR2-H, 2 x PS 405 10A, 24/48/60 V DC 4 x sync modules up to 10 m 2 x sync cable 1 m 2 x CPU 412-3H 4 x buffer batteries
- Read more
- Uncategorized
- SIMATIC S7-400H, 412-3H System bundle H-system with 2 x MC 1 MB RAM, 1 x UR2-H, 2 x PS407 UC120/230V, 10 A 4 x sync modules up to 10 m 2 x sync cable 1 m 2 x CPU 412-3H 4 x buffer batteries
- Read more
- Uncategorized
- SIMATIC S7-1200, CPU 1211C, compact CPU, DC/DC/relay, onboard I/O: 6 DI 24 V DC; 4 DO relay 2A; 2 AI 0-10 V DC, Power supply: AC 20.4-28.8 V DC, Program/data memory 25 KB
- Read more
- Uncategorized
- SIMATIC S7-200, CPU 222 Compact unit, DC power supply 8 DI DC/6 DO DC 4 KB progr./2 KB data, PROFIBUS DP expandable
- Read more
- Uncategorized
- SIMATIC S7-200, Modem expansion module Analog modem, for PPI, MODBUS master/slave, SMS functionality and S7-200-to-S7-200 communication, callback and password protection
- Read more
- Uncategorized
- SIMATIC S7-200, EM253 Positioning expansion module, 200 kHz, for controlling stepper motors or servo drives, open-loop control, programming via Micro/WIN
- Read more
- Uncategorized
- SIMATIC NET, CP 243-2 Communications processor for Connection of SIMATIC S7-22X to AS-Interface with Masterprofile M0E/M1E according to AS-i specification 2.11
- Read more